Flat Articulating Arm Trough
Processing...

Flat Articulating Arm Trough


$272.00

Qty

DESCRIPTION

The Flat Articulating Arm Trough supports the arm with a flat pressure-redistributing pad which can be removed for cleaning. The part of the device that faces inward toward the seating area also has a removable pad which is 1" thick. The arm trough rotates 90 degrees internally and can travel forward 6 inches to extend the arm rest length. It has three swivel locations in 2-inch increments and is held in place or adjusted by tightening or loosening knobs on the bottom.

Arm trough pad measurements:
  • 2" thick in the center
  • 3" thick on the edge
  • 8" wide x 16" long
Hip pad measurement:
  • 1" thick x 8" high x 12" long

You must select which ARM SIDE this device will be installed on. Because of the way the hardwarwe is attached the device is NOT AMBIDEXTROUS (A 212-R is shown as the default product image).

Hardware to mount the device over a standard wheelchair armrest is included.

An ELEVATED Articulating Arm Trough is also available: item# 211-L and 211-R. Customization is also possible.

Part Numbers

Part Number Patient Side
212-L Left
212-R Right

select a tab above to view contents
Product Video